6000-PRO with #7 Nozzle - Factory Installed

Item #: RGW6000-7

Product Information
-The 6000 Pro series rotors are constructed of high impact plastic and all internal metal parts are made of stainless steel.
-3/4" (2 cm) inlet -No tools are required to adjust the arc from 40 - 360 degrees by using the easy to use Click-Set disc.
-This series comes with 8 interchangeable nozzles with a discharge range between 1.0 - 9.5 gpm (0.23 - 2.16 m3/hr). There is also a low angle nozzle tree available.
-All models come with a rubber protective cap and an optional vandal resistant retaining screw.
-The built in slip clutch protects the gears and motor from damage when adjusting for a part circle. If the rotor is manually moved out of position it will automatically reset to the defined pattern.
-NIR2 (Nozzle Insertion / Radius Reduction) eliminates the need to remove the cap while fine tuning the radius and inserting the nozzle.
-6000 comes in many various styles: shrub head version, heavy duty stainless version, 12" (30,5 cm) high pop version, anti-drain valve (ADV) version and the standard version.
  • High impact plastic
  • Internal metal parts of stainless steel
  • Plastic Riser
  • Adjust arc with Click-Set disc
  • 8 interchangeable nozzles
  • Vandal-resistant rubber protective cap
  • Automatic reset to defined pattern
  • No need to remove the cap for fine tubing
  • Many styles available
  • Body Height7-3/8 in
  • Cap Diameter2-7/8 in
  • Type of CapRubber w/ locking screw
  • Discharge1.0 - 9.5 gpm
  • Exposed Cap Diameter1-7/8 in
  • Inlet Size3/4 in
  • Maximum Pressure75 psi
  • Operating Range20 - 65 psi
  • Pop-up Height4 in
  • Screen Mesh.045 sq in
  • Spray Trajectory25 degrees
  • R&R Product IDRGW6000-7
  • BrandWeathermatic
  • Mfr Model #6000-7
Replacement Parts
Item(s) Added to Your Cart
1 item in your bag